Mr. Heater MH40PH Especificações

INSTRUCTIONS AND PARTS LIST RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. INSTALLER – LEAVE THESEINSTRUCTIONS WITH THE CONSUMERPATIO HEATER MODELS:

Servicing: A hazardous condition may result if a heater is used that has been modified or is not functioning properly. When the heater is working pro

\\Commserv\Users\EGI_Shared\Engineering\Labels & Manuals WIP\MH40PH\MH40PH Manual.doc Page 11 of 11 06/08 Rev A

06/08 Rev A

Page 2 of 11 WARNING: FOR OUTDOOR USE ONLY FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of t

Fuel Safety Precautions WARNING Asphyxiation Hazard  Do not use this heater for heating human living quarters.  Do not use in unventilated areas.

ASSEMBLY INSTRUCTIONS. Removing Heater from Package: 1. Remove heater, reflector from carton. 2. Remove all shipping packaging from heater component

Step 2: Tighten the 3 nuts on the emitter top. Step 3: Attach Emitter Assembly to Burner Assembly (4-screws 3/16"-24×3/8") Step 4: Att

Step 8: Place Cylinder Cap onto Post pull into place. Step 9: Assemble the Gas Line to the Burner Assembly and tighten. Step 10:

Step 12: Attach Burner Assembly to the Post (3 bolts 1/4"-20×1/2" & 3 flat washers) Step 13: Attach Dome to the Emitter (3

Step 16: Place the Propane Cylinder into the Base. Then lift the cylinder Cap Support, to hold the cap in position. Attach the Front Cover to the Bac

To Shutdown: 1. Turn gas control knob clockwise to “OFF” position. o Caution: Cylinder removal should only be undertaken when heater is cool to the